- Reviews (0)
“EMAUX” CF SERIES CARTRIDGE FILTERS
“CF” SERIES CARTRIDGE FILTERS
ompact and light weight
UV resistant tank
Heavy duty ring-lock lid allows easy cleaning and replacement of the cartridge
Screw type air bleeder for easy removal of trapped air inside the fi liter tank
High quality oil fi led pressure gauge for easy inspection of the operation pressure
Application to domestic swimming pool & spa
Maximum Working Pressure 250kPa /36psi/2.5bar
Maximum Water Temperature 400C (1000F)
“EMAUX” LED‐TP100 SERIES UNDERWATER LIGHTS (Wall Mount Type)
• Resin‐fills LED panel allows 100% water proofing
• Material : ABS + UV stabilizer
• Cable 2.5 meters
• Waterproof: IP68
• Installation: Wall Mount Type
SANDIA SSR. Series
The SSR – range is ideally suitabie for permanent in-ground residential indoor or outdoor pools.
The main tank structure is made from extremely hard wearing glass reinforced polyeter. The smooth high gloss internal and external finish ensures free flow and easy cleaning.
The side mounted multi-port valve configuration together with the large lid access (230mm diameter) allows servicing of the interior without the need to disturb the connecting pipe-work.
Combined with the low head loss under-drain system and connection pipe-work, the SSR filter is one of the most efficient and cost effective on the market.
* 6-way multi-port valve
* valve connection pipework
* pressure gauge
* non-standard colors on request
* union adaptors
GREENCO 2RB Series
GREENCO 2RB type can be applied both as vacuum pump and compressor in
continuous operation over the total stated performance curve range. The
motors are available as standard for the input voltage range of 50 and 60 Hz
and for protection category IP 54 as well as approbated for EC and ROHS.
This motors are designed according to the DIN EN 60 034 / IEC 34-1 and
temperature class F.
For the three phase machines the tolerances +/- 10% for fixed voltage and
for +/- 5% voltage range
The single phase machines are designed with a +/- 5% tolerances. If only 90%
of the maximum allowed pressure will be used for continuous operating then
the allowed voltage range add to +/- 10%.
The frequency tolerances is maximum +/- 2%.
• Class insulation: F
• IPX5 Waterproof Standard
• Low noise level
• Built‐in thermal protection
• Stator applied by molding process with moisture
resistance and heat security
• Complete separation of water and the shaft, safe
• High‐quality wear‐resistant mechanical seal