Scala 2 Booster Pump

Scala 2 Booster Pump

SCALA2

PERFECT WATER PRESSURE
Technical details                SCALA2

Floors                                    Max. 3

Taps                                      Max. 8

Dimensions                         H: 302 mm, L: 403 mm, W: 193 mm

Weight                                  10 kg

Code                                       :98562870

Flow                                        : 3 m3/h

Head                                       : 27m 1 x 220-240v, 50Hz

 Scala 2 Video

Category:
  • Description
  • Reviews (0)
  • Pump Specification
  • Performance curve & Dimensional Drawing

Description

Variable Speed H0me Booster Pump

  • Grundfos SCALA2 is a fully integrated, self-priming, compact waterworks for pressure boosting in domestic applications. SCALA2 incorporates integrated speed control enabling the keeping of the perfect pressure at the taps, meaning that the pump performance will increase with increasing demand.SCALA2 can be installed in three easy steps:
    1. Connect the pipes. 2. Prime the pump. 3. Plug the pump into the power outlet and the pump will start.Grundfos SCALA2 has all the components necessary to ensure a comfortable pressure:

    • intelligent controller
    • integrated speed-controlled drive
    • integrated tank
    • integrated sensors
    • integrated non-return valves.

    As it is self-priming, the SCALA2 is able to pump water from a level below the pump. Provided it is filled with water, the pump is able to lift water from a depth of 8 m in less than 5 minutes. This facilitates easy installation and start-up of the pump and provides more reliable water supply in installations where there is a risk of dry running and leakages in suction hose or pipes.

    If exposed to dry running, water shortage or excessive temperature, blocked pump, for example in case of seizure or overload, the pump will stop automatically, thus preventing a motor burnout.

    The pump features an automatic reset function. In case of dry running or similar alarm, the pump will stop. Restarting will be attempted every 5 minutes 8 times, there after new restart attempt will occur every 24 hours. The automatic reset function can be deactivated.

    Thanks to its hydraulic design, permanent magnet motor and water cooling, the pump is extremely low-noise, 47 dB(A) in typical use, which makes it suitable for indoor as well as outdoor use. Max noise level at full load are 53 dB(A)

    The built-in pressure tank reduces the number of starts and stops in case of leakages in the pipe system, causing less wear on the pump.

    SCALA2 require no maintenance, but it is recommended to keep the pump clean, check the non-return valves and keep the ventilation holes free of dust

     

Reviews

There are no reviews yet.


Be the first to review “Scala 2 Booster Pump”

six + seven =

Specifications

Product nameSCALA2 3-45 A
Product No98562870
EAN number5711497234278
PriceOn request
Technical
Rated flow3 m³/h
Rated head27 m
Head max45 m
Primary shaft sealCARBON/CERAMIC
Approvals on nameplateCE,VDE
Approvals for drinking waterWRAS,ACS
Curve toleranceISO9906:2012 3B
ModelA
Materials
Pump housingNORYL FE1630PW PPE+PS-GS30
ImpellerNORYL FE1630PW PPE+PS-GS30
Material codeA
Installation
Range of ambient temperature0 .. 55 °C
Maximum operating pressure10 bar
Maximum permissible inlet pressure6 bar
Pipe connectionG 1 Composite
Liquid
Pumped liquidWater
Liquid temperature range0 .. 45 °C
Q_OpFluidTemp20 °C
Density998.2 kg/m³
Electrical data
Power input - P1550 W
Mains frequency50 Hz
Rated voltage1 x 200-240 V
Rated current2.8 A
Enclosure class (IEC 34-5)IPX4D
Insulation class (IEC 85)F
Length of cable2 m
Power plugType G (BS1363)
Others
Net weight10 kg
Gross weight12.8 kg
Shipping volume0.044 m³
Storage temperature range-40 .. 70 °C